Wednesday, November 26, 2014

Hand Print Turkey Puppets!

I have always wanted to try this Thanksgiving project, and this afternoon was the perfect opportunity. I used an image from Google Images as my starting point:



These were the materials we used:

  • brown and pink construction paper
  • glue sticks
  • hot glue or regular glue
  • popsicle sticks 
  • crayons
  • laminator and laminating sheets (optional)

I was too distracted to take pictures during the actual process of making these, but I have some of the finished product. It was a really simple activity that even Baby E (newly two) really enjoyed. I traced each child's hand on a piece of brown construction paper. They colored the hand prints, and then I cut them out. I cut out little pink construction paper feet, and the kids glued them on with glue sticks. Next was the kids favorite part - laminating! We laminated the Turkeys, and then glued them onto large popsicle sticks. The hardest part was waiting for the glue to dry!

Here is the finished Turkey puppet:



You could also make these into cute cards or centerpieces.

Happy Thanksgiving!


2 comments:

  1. The end result of each pull is definitely controlled by a central laptop inside the machine, not by the movement of the reels. Then the three reels stop abruptly separately, adopted by the payout . If the primary reel stops on the jackpot symbol, then you have to to|you must} anticipate the following reel to stop to see if it's a jackpot, after which finally the third. In the Nineteen Eighties, nevertheless, slot machine 퍼스트카지노 manufacturers included electronics into their products and programmed them to weight specific symbols. Thus the percentages of shedding symbols showing on the payline became disproportionate to their actual frequency on the physical reel.

    ReplyDelete
  2. The 5AXISMAKER is a desktop 5-axis multi-fabrication CNC machine that hopes to best fish tank heater broaden the possibilities of digital fabrication by making it low cost and extra versatile. Should the project obtain backing on Kickstarter earlier than the twenty seventh October 2014, risk of|the potential of|the potential for} 5-axis milling will become an inexpensive actuality for manufacturing advanced design prototypes. Gears may be produced utilizing quantity of} CNC methods, together with hobbing, EDM, or millingThere are many methods of creating gears. Similarly, gear hobbing may be utilized to extensive range|a variety} of supplies, not simply metals.

    ReplyDelete